This page separates current, expired and relationship-pending evidence for Shenzhen Color Printing Paper Packaging Co., Ltd. (深圳市彩之印纸品包装有限公司, unified social credit code 91440300MA5DA1RR87), established 5 April 2016. The current production address is Huixin Zhichuang Park, 108 Huarong Road, Longhua District, Shenzhen, China. Each item states its issuer, date, scope and limitation; a document is not treated as company-wide product approval merely because it exists.
A buyer should match the legal entity and identifier on each document, check the issuing body's public register, confirm that the document is still valid and read its exact scope. A test report must also be matched to the submitted sample and intended use. This register therefore labels current management-system certificates, an expired HACCP record, a single-sample food-contact report and FSC records whose holder-to-factory relationship still needs documentation.
Established 5 April 2016
Legal entity: Shenzhen Color Printing Paper Packaging Co., Ltd. (深圳市彩之印纸品包装有限公司). Current production address: Huixin Zhichuang Park, 108 Huarong Road, Longhua District, Shenzhen, China.
Address note: the licence image still displays the former registered address following the factory move. The current production address also appears for the applicant and manufacturer in report XNO250418226BX2-1.
Document CN25/00008559 · dated valid 15 December 2025 – 14 December 2030
The document describes FSC 100%, FSC Mix and FSC Recycled paper and paperboard under a transfer system. BestPackFactory has not yet supplied documentary evidence linking the public certificate holder to the licensed factory entity above.
Do not treat this as a BestPackFactory-held credential until that relationship is documented. Independently search search.fsc.org for SGSHK-COC-332603.
Licence FSC-C171757 · dated valid 3 November 2021 – 2 November 2026
This second document is also retained for review, not presented as a factory-held credential. A buyer must match the public holder to the contracting legal entity and confirm the order-specific FSC claim before production.
Verify independently at search.fsc.org using FSC-C171757.
First registered 25 November 2025 – valid to 24 November 2028
Quality management system for the manufacture and sales of paper packaging products (except licence requirements). Issued under the unified social credit code 91440300MA5DA1RR87.
Scope note: a management-system certificate. It attests that the factory runs a documented QMS — it is not a product claim and not a food-safety approval.
Verify: ACM International Certification and CNCA (www.cnca.gov.cn). Issuing body IAF-accredited (MSCB-345).
Initial 10 September 2024 – valid to 20 December 2028
Occupational health and safety management system for management activities related to printing of cartons (trademarks and logos) and production of paper packaging products. Held by Shenzhen Color Printing Paper Packaging Co., Ltd. (深圳市彩之印纸品包装有限公司, unified social credit code 91440300MA5DA1RR87).
Scope note: IAF multi-lateral recognition and CNAS accredited (C021-M) — a worker-safety system claim, distinct from any product certification.
Verify: CNCA (www.cnca.gov.cn)
Expired 3 September 2026 · effective from 4 September 2025
The historical scope covered specified disposable paper containers where the food-contact surface is paper or polyethylene.
This document is not current and must not be used as proof of an active HACCP certificate. Request renewed evidence for any order that requires HACCP certification.
Applicant and manufacturer: Shenzhen Color Printing Paper Packaging Co., Ltd. · Sample: red 800g coloured plastic food-packaging bag · applicant-identified main substance: PE.
Guangzhou Supreme Technology & Testing Service Co., Ltd. recorded PASS for density at 23°C (0.882 g/cm³ against 0.880–0.913), soluble fraction in xylene at 25°C (<1.0% against 11.3%) and extractable fraction in n-hexane at 50°C (<0.5% against 5.5%).
Scope note: these are selected tests under FDA 21 CFR 177.1520 for one submitted sample. The report is not FDA approval, FDA facility registration or blanket certification of every product. The signed four-page report is available to qualified buyers on request.
Certification covers the converter's system and the material classes it is registered for. It does not automatically extend to every product, or to a claim a buyer's own market requires. To know which documents can be supplied for your specification, send the intended use, destination market and required standard before sampling. We will confirm the applicable certificate and evidence for that exact combination — and state clearly when the certificate does not cover it.
Send your product details, intended market, contact layer and required standard. We will confirm which certificate and test evidence applies to that exact specification.
Click below to contact us quickly by WhatsApp or email. We can help with dieline, samples, printing, materials and worldwide shipping.
💬 Chat on WhatsApp✉ Email Inquirylisa@colorprintingpackage.com